Filter
Top Products
Operation
43
copied on the channel. After
about 2 seconds, the scanner
automatically returns to
search mode.
3. If you try to copy a frequency
which is already stored, the
scanner sounds the notice
tone 3 times after you press
ENTER. Dupl.f Chxxx appears
at the bottom line. If you want
to copy the duplicate
frequency anyway, press
ENTER,orifnot,pressCL to
cancel.
Copying a Frequency into
the Priority Channel
You can copy a frequency into the
priority channel (see “Priority” on
Page 47) when the scanner stops
on the frequency during Search,
Scan, Manual, Tune, or WX mode.
Press
FUNC then PRI when the
frequency is on the display. The
display flashes twice and the
frequency is copied to the priority
channel.
SCANNING THE
C
HANNELS
To begin scanning channels or to
start scanning again after
monitoring a specific channel,
press
SCAN. Ô
The scanner scans through all
channels (except those you have
locked out) in the active banks
(see “Turning Channel-Storage
Banks Off and On” on Page 44
and “Locking Out Channels or
Frequencies” on Page 45).
Ô NOTE Ô
• You must store
frequencies into
channels before
the scanner can
scan them. The
scanner does not
scan through
empty channels.
• To change the
scanning
direction, press
or .