Filter
Top Products
Special Features
52
lit areas. Press to turn on the
backlight for 5 seconds. To turn off
the backlight before it automatic-
ally turns off, press again.
To turn on the backlight so it does
not turn off automatically, hold
down for about 1 second.
Press while the backlight is on
to turn it off.
You can select the amount of time
the light stays on. Follow these
steps to change the illuminated
time:
1. If the scanner is on, turn it off
and back on again.
Welcome to
Dual Trunking
appears.
2. While
Welcome to Dual Trunking
appears, press .
3.
Use Up/Down keys to set Lit off
time 5 seconds
appears
4. Press
or to select 3, 5,
10 or 20 seconds then press
ENTER.
USING THE KEYLOCK
Once you program your scanner,
you can protect it from accidental
program changes by turning on
the key lock feature. When the
keypad is locked, the only controls
that operate are
FUNC,/,
SQUELCH,andVOLUME.
You cannot activate the key lock
while you are entering a frequency
into a channel.
To turn on the key lock, press
FUNC then / . Key locked.
appears for about 1 second. Key