Filter
Top Products
Trunking
59
1. Press
PGM then TRUNK to
enter the ID program mode.
2. Press
FUNC and press (or
hold)
or to select the
bank.
3. Press
MODE and select MOT.
4. Press
FUNC then 2.The
display indicates
Base freq.: on
the first line,
406.0000 on the
second line,
Offset: 380 on the
third line and
Step: 25.0kHz on
the bottom line.
5. While
B in Base blinks, if
necessary, press the desired
Base frequency with the
number keys and press
ENTER.Confirmtheentry.Ifit
is incorrect, press the number
keys again to set the base
frequency. After you confirm
the input, press
ENTER again.
6. While
O in Offset blinks, if
necessary, enter the offset
number and press
ENTER.
Confirm the entry. If it is
incorrect, then press the
number keys again to set the
frequency. After you confirm
the input, press
ENTER again.
7. While
S in Step blinks,
repeatedly press
or to
select the step number,
25.0,
50.0 or 12.5 kHz, then press
ENTER.
8. Press
PGM to enter the
program mode. Store the
trunking IDs into the sub-bank
in the same bank.