Filter
Top Products
Special Features
48
the scanner has one priority
channel.
With the priority feature, you can
scan through programmed
channels and still not miss an
important or interesting
transmission on a specific
channel. When priority is turned
on, the scanner checks that
channel every 2 seconds, and
stays on the channel if there is
activity until the activity stops.
Ô
To program a frequency in the
priority channel:
1. Press
MANUAL.
2. Use the number keys to enter
the channel number which
contains the frequency you
want to program as the
priority channel. Then press
MANUAL again.
3. Press
FUNC then PRI. Pri
Channel
blinks on the bottom
line.
To program the priority channel
directly:
1. Press
PGM.
2. Press
PRI.
3. Enter the frequency you want
to enter into the priority
channel, then press
ENTER.
To program a weather channel as
the priority channel:
1. Press
WX.
Ô NOTE Ô
• The priority
feature does not
operate while the
scanner receives
a trunking voice
channel or during
trunking delay
time. Therefore,
the priority check
seems random
duringpeak hours.
• If you program a
weather channel
as the priority
channel, the
scanner stays in
the priority
channelonly when
the scanner
detects the
weather alert tone
• This scanner
cannot set a
channel as the
priority channel if
the channel's
receive mode is
MOT or ED.