Filter
Top Products
M30850T2-EPB User’s Manual 2. Setup
REJ10J1005-0200 Rev.2.00 April 1, 2007
2.5 Connecting the Power Supply for the Emulator
The power is supplied from AC adapter to the emulator PC7501. Here following explains how to connect the AC adapter.
(1) Turn OFF the power to the PC7501.
(2) Connect the DC cable of AC adapter to the PC7501.
(3) Connect the AC power cable to the AC adapter.
(4) Connect the AC power cable to the receptacle.
CAUTION
Cautions for AC Adapter:
z Use only the AC adapter included in PC7501 package.
z The included AC adapter is for PC7501. Do not use it for other product.
z Before installing this equipment or connecting it to other equipment, disconnect the AC power cable from its
outlet to prevent injury or accident.
z The DC plug on the included AC adapter has the below polarity.
z The included AC adapter has no power supply switch. The AC adapter is always active while connecting the
AC power cable. Check if the power is supplied by the LED of AC adapter.
Page 23 of 98