M30850T2-EPB User’s Manual 4. Hardware Specifications
REJ10J1005-0200 Rev.2.00 April 1, 2007
4. Hardware Specifications
This chapter describes specifications of this product.
4.1 Target MCU Specifications
Table 4.1 lists the specifications of target MCUs which can be debugged with this product.
Table 4.1 Specifications of target MCUs for the M30850T2-EPB
Item Description
Applicable MCU M32C/80, 84, 85, 86 and 8A Groups
Applicable MCU mode Single-chip mode, memory expansion mode, microprocessor mode
Maxi. ROM/RAM capacity 1. Internal flash ROM: 512 KB + 4KB
0F000h--0FFFFh, F80000h--FFFFFFh
2. Internal RAM: 24 KB
00400h--063FFh
Operating voltage/frequency* VCC1=VCC2=4.2--5.5 V: 32 MHz
VCC1=VCC2=3.0--5.5 V: 24 MHz
Dual-power supply specification
(4.8V ≤ VCC1 ≤ 5.2V and 3.3V ≤ VCC2 ≤ VCC1): 32MHz
* When the JP1 of the M30850T2-EPBM is set to VCC1>VCC2, the voltage of VCC2 on the user system should be 3.3 V or
more.
Page 75 of 98