Filter
Top Products
M30850T2-EPB User’s Manual 2. Setup
REJ10J1005-0200 Rev.2.00 April 1, 2007
Unscrew the screw of the oscillator circuit board of the PC7501 and replace it (see Figure 2.16).
The oscillator circuit board of the PC7501 is in the lower right corner of the
board.
Unscrew the screw securing the oscillator circuit board.
Lift off the oscillator circuit board.
Attach another oscillator circuit board to the connector.
Secure the new oscillator circuit board with the screw.
Figure 2.16 Replacing oscillator circuit boards
Reinstall the upper cover once removed and secure the four screws of the PC7501.
CAUTION
When Removing the Upper Cover:
z Always shut OFF power when removing the upper cover or changing the oscillator circuit board. Otherwise the
internal circuit may be damaged.
Page 42 of 98