Filter
Top Products
8. FUNCTIONS AND PROGRAMMING
8-3 Telephone Line Type Setting – F 03
This feature lets the user select the dialing mode of the operation
panel’s ten-key pad. The type of dialing used by the machine must
be the right type for your local telephone exchange, or your terminal
may not be able to place calls.
There are two dialing modes: pulse
dialing, and tone dialing. The initial status on the LCD is “O O“ for
TONE mode. But you can enter “O 1“ to change to PULSE mode
from TONE mode.
—
1)
2)
3)
Procedure –
Press FUNCI’ION, then press “3”.
The LCD will display “ F 01”.
r
—
FAX
FO1
8 18 ‘M
1
Press the DETAIL key 2 times to access - – FM
F 03.
r
F03 00
1
I I
Enter “ 1“ to change to PULSE mode,
if it is necessary. Or, press ‘O’ to change
back to TONE mode.
Fti
F03 01
[“-
FAX
4) Then press the START/ COPY key to
F04 01 90
J
program in the setting and access F 04. -- — ‘-—–’-
5) Press the STOP key if you wish to return to
standby mode.
NOTE:
If your machine cannot dial, change this setting.
31
Immcl’