Filter
Top Products
8. FUNCTIONS AND PROGRAMMING
—
1)
2)
3)
4)
5)
6)
7)
Procedure –
Press FUNCTION, then “3”.
The LCD will display “F 01”.
Press the DETAIL key 4 times to access
F 05.
Use the numerical keypad to select the
code related to the first character.
The first character should be “R”.
The code for R is “29”.
So, press
“2”, then “9”.
The display should be as shown on the
right.
O 1 means the first character.
2 9 is the related code corresponding
to the first character “R”.
Then press the VOICE REQUEST key
to go to the second character.
The second character should be “I”.
The code for “I” is “20”.
So, press
“2”, then “O”.
The display should be as shown on the
right.
O 2 means the second character.
2 0 is the related code corresponding
to the second character “I”.
Repeat steps 3) and 4) to enter all the
characters.
Then press the START/COPY key to
program in the setting and access F 06.
E----.-
FA%
1
FO1
8:17 ‘M’
—_.
1--
‘FiX
‘-- ‘-- 1
F05 01 90
1--- -- .—— —....
J
r
Fti-
F05 0129
1-. . . -.-. -.-----J
i—
FAX
F05 02 20
I
L. . .. .
—
-J
r-“
—
FAX –
F06 00 00
1–– - -––——— J
Press the STOP key if you wish to return
to standbv mode.
35
Immw