Filter
Top Products
10. TROUBLESHOOTING
10-1 Misfeeds
–
Document jam –
When the LCD shows an error code during scanning
(transmission or copying), the document has jammed.
Clear the jam as follows.
See Figure 10.
.—
1) Open the panel cover
r x’:.””% ~
with both hands.
2) Remove the document
carefully,
Figure 10
3) Then close the panel cover.
A damaged document may cause a misfeed.
Refer to page 12 for suitable document types.
– Paper jam –
When the LCD shows an
the paper has jammed.
Clear the jam as follows.
See Figure 11.
1)
2)
3)
Open the panel cover
with both hands until
it locks.
Take out the thermal paper
roll and cut off the da-
maged part of the paper.
error code during printing,
,-
+
I
Figure 11
Re-feed the paper through the facsimile under the
guide
plate with a green label.
Refer to page 6 for how to replace the paper.
Misfeeds may occur ifi
-The paper size is not correct.
-The machine is not level.
-There is condensation inside the machine. (Refer to P. 2.)
45
IMI(IWIT