Filter
Top Products
User Tools (Copy/Document Server Features)
108
5
❖
❖❖
❖ Auto Sort
You can specify whether Sort
mode is selected when the ma-
chine is turned on or reset, or the
mode is cleared.
❖
❖❖
❖ Memory Full Auto Scan Restart
When the memory becomes full
while scanning originals, the ma-
chine can make copies of the
scanned originals first, and then
automatically proceed scanning
the remaining originals.
You can enable or disable this
function.
Note
❒ If you select [No]:
• When the memory becomes
full, the machine stops oper-
ation allowing you to remove
the copy pages delivered on
the output tray.
❒ If you select [Yes]:
• You can leave the machine
unattended to make all the
copies, but the resulting sort-
ed pages will not be sequen-
tial.
❖
❖❖
❖ Select Stapling Position (Top Left)
You can register a type of stapling
used frequently in the top left sta-
ple key on the initial display. You
can also change the registered
type.
Note
❒ The Finisher 3000B, Finisher
3000M or Booklet Finisher is re-
quired to use this function.
❖
❖❖
❖ Select Stapling Position (Bottom Left)
You can register a type of stapling
used frequently in the bottom left
staple key on the initial display.
You can also change the registered
type.
Note
❒ The Finisher 3000B, Finisher
3000M or Booklet Finisher is re-
quired to use this function.
❖
❖❖
❖ Select Stapling Position (Top Right)
You can register a type of stapling
used frequently in the top right sta-
ple key on the initial display. You
can also change the registered type.
Note
❒ The Finisher 3000B, Finisher
3000M or Booklet Finisher is re-
quired to use this function.
❖
❖❖
❖
Select Stapling Position (Bottom Right)
You can register a type of stapling
used frequently in the bottom right
staple key on the initial display.
You can also change the registered
type.
Note
❒ The Finisher 3000B, Finisher
3000M or Booklet Finisher is re-
quired to use this function.