Programs
135
6
Programs
You can register frequently used settings in the machine memory and recall
them for future use.
Note
❒ You can register up to 25 programs for the scanner mode.
❒ Programs are not deleted by turning the power off or by pressing {Clear
Modes} unless the content is deleted or newly registered.
❒ The following settings can be registered to programs: Scan Settings, 1 Sided / 2
Sided Original, Mix 1 & 2 Sided, Top to Top / Top to Bottom, skip scanning
back side of the last page, Divide, Original Orientation, File Type, Batch/SADF,
Thin Paper, Store File, Preview, and Reception Notice.
❒ Setting made on the simplified display cannot be registered to a program.
Registering Frequently Used Setting
To register frequently used settings in a program:
A On the initial scanner screen, make the settings you want to register in a
program.
B Press {Program}.
C Press [Program].
D Select the number of the program in which you want to register the settings.
Program numbers with malready have settings in them.
E Enter the program name.
AMR009S