Filter
Top Products
Operating Instructions Administrator Reference
60
C As necessary, type the names to distinguish the printer in [IPP Port Name]. Type a different
name from those of any existing port name.
If you omit this, the address typed in [Printer URL] will be set as the IPP port name.
D If a proxy server and IPP user name are used, click [Detailed Settings] and configure the
necessary settings.
Note
❒ For more information about these settings, see SmartNetMonitor for Client Help.
E Click [OK].
LPR Port
A Click [Add].
B Select [LPR Port], and then click [OK].
C Type the printer's IP address in the "Name or address of server providing lpd" box.
D Type "lp" in the "Name of printer or print queue on that server" box, and then click [OK].
J
JJ
J
Make sure the location for the selected printer is shown after [Port:].
K
KK
K
Double-click [Shared] to display the shared settings.
L
LL
L
To share the printer, check the left side of the [Shared] box.
M
MM
M
Click the box under [Shared name] to install the alternative driver for the necessary system.
Note
❒ Check [
Shared
] to start installation of an alternative driver ([
Windows NT 4.0/2000
], [
Windows 95/98
])
has already been selected.
❒ You can add an alternative driver after installation. See p.70 “Setting the Printer Shared”.