Filter
Top Products
Operating Instructions Administrator Reference
233
Configuring a WINS Server
The printer can be configured to register its NetBIOS name with a WINS server when power is turned
on. This enables the NetBIOS name of the printer to be specified from SmartNetMonitor for Admin
even under a DHCP environment.
This section describes how to configure the WINS server.
Note
❒ The WINS Server is supported with Windows NT 4.0 Server Service Pack 4 or later, and Windows
2000 Servers WINS Manager.
❒ For more information about the WINS Server settings, see Windows Help.
❒ If there is no reply from the WINS Server, the NetBIOS name will be registered by broadcast.
❒ The NetBIOS name consists of up to 13 alphanumeric characters.
Using a Web browser
A
AA
A
Start the Web browser.
B
BB
B
Point your browser at the URL or IP address of the printer (e.g. http://XXX.XXX.XXX sub-
stituting the Xs with the IP address).
The status of the printer you chose appears on the Web browser.
C
CC
C
Click Network Config.
The dialog box for entering the password and user name is displayed.
D
DD
D
Enter your user name and password, and then click [OK].
To use the factory default account, enter no user name and type "password" for the password.