Filter
Top Products
60
By default, the microphone signal is routed to the matrix, and the matrix signal is routed to the speaker and to the left and right
headphones.
The sources available for mixing and sending are as follows:
• Aux 1 – 6 (This feature is only available when GPI 32 CLD option card is installed)
• Headset Mic
• Matrix
• Panel Mic
• Rear Headset Mic (This feature is only available when GPI 32 CLD option card is installed)
• Rear Panel Mic (This feature is only available when GPI 32 CLD option card is installed)
NOTE: If all resources are being used, the Rear Panel Mic is not available.
To configure mixing on the KP 32 CLD, do the following:
1. On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
2. Using the 3(↑) or 6(↓), select Audio Options.
3. Press the SEL button.
The Audio Options submenu appears.
4. Using the 3(↑) or 6(↓), select DSP Funcs.
5. Press the SEL button.
The DSP Funcs menu appears in the display window.
6. Using the 3(↑) or 6(↓), select Mixing.
SOURCE
Front Pane Mic
Matrix Audio In
Front Headset Mic
Rear Headset Mic
Rear Panel Mic
Aux IN 1
Aux IN 2
Aux IN 3
Aux IN 4
Aux IN 5
Aux IN 6
DESTINATION
Matrix OUT XXXXXXXXXXX
Front Speakers XXXXXXXXXXX
Front Headset Left XXXXXXXXXXX
Front Headset Right XXXXXXXXXXX
Rear Headset Left XXXXXXXXXXX
Rear Headset Right XXXXXXXXXXX
Rear Speaker Left XXXXXXXXXXX
Rear Speaker Right XXXXXXXXXXX
Mic OUT XXXXXXXXXXX