Filter
Top Products
211
3. Useful Setting Menus
Network setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 35).
• Press (Menu)> Network on the control panel.
Option Description
TCP/IP (IPv4)
Selects the appropriate protocol and configure
parameters to use the network environment.
There are lots of parameters to be set. If you are
not sure, leave as is, or consult the network
administrator.
TCP/IP (IPv6)
Selects this option to use the network environment
through IPv6 (see "IPv6 configuration" on page 161).
Ethernet Speed Configure the network transmission speed.
Wireless Selects this option to use the wireless network.
Clear Setting
Reverts the network settings to the default values.
(Reboot required.)
Network Conf.
This list shows information on your machine’s network
connection and configuration.
Protocol Mgr.
You can activate or deactivate the following protocols.
• Net. Activate: You can set whether to use Ethernet on
or off.
Turn the power off and on after you change this
option.
• Http Activate: You can sets whether to use
SyncThru™ Web Service or not.
Turn the power off and on after you change this
option.
• WINS: You can configure the WINS server.
WINS(Windows Internet Name Service) is used in the
Windows operating system.
Turn the power off and on after you change this
option.
Option Description