Filter
Top Products
Control Panel Lights
The printer is out of paper. The Paper light blinks until
paper is added.
Load paper into the printer. There is no need to press
any button to reset.
Paper out
The printer is processing data in the Manual Feed mode.
Wait for the job to print.
Printing in the manual feed mode
The printer is set to Manual Feed mode. You have to
feed paper manually through the Multi-Purpose Tray. If
you do not want to be in the Manual Feed mode,
change the setting from your printer properties. For
details on the Manual Feed mode, see page 4.10.
Manual feed mode
In the Manual Feed mode, the printer picks up paper
from the Multi-Purpose Tray, one sheet at a time.
Feed the correct paper in the Multi-Purpose Tray, and
press the Demo button to start printing.
Paper out in the manual feed mode
3.5
USING THE CONTROL PANEL
The size of the paper in the input tray is mismatched to
the Paper Size setting in printer's properties. Remove
the paper from the tray and load the paper of the same
size as you have set in the properties.
Paper Mismatch