Filter
Top Products
7.6
Troubleshooting
Display
Meaning
Solution
PAPER JAM 2
POLLING ERROR
POWER FAILURE
WARMING UP
Jammed paper still remains
inside the unit.
Clear the jam. See page 7.1.
The remote fax machine you
want to poll is not ready to
respond to your poll.
Or
When setting up to poll another
fax machine, you have used an
incorrect poll code.
The remote operator should know
in advance that you are polling
and have their fax unit loaded
with the original document.
Enter the correct poll code.
A power failure has occurred.
If documents have been stored in
the memory, a ‘Power Failure
Report’ will be automatically
printed when the power is
restored.
TONER EMPTY
The printer is warming up and
is off-line.
Wait until the machine is on-line.
The toner cartridge has run out.
The machine stops.
Replace with a new toner
cartridge.
TONER LOW
The toner is almost empty.
Take out the toner cartridge and
gently shake it. By doing this,
you can temporarily re-establish
printing operations.
RETRY REDIAL ?
The machine is waiting for a
specified time interval to redial
a previously busy station.
You can press Start/Enter to
immediately redial, or Stop to
cancel the redial operation.
RECEIVE ERROR
A fax has not been received
successfully.
A problem with the facsimile
communications has occurred.
Try again.
SEND ERROR
Your fax has not gone through
successfully.
A problem with the facsimile
communications has occurred.
Ask the sender to try again.
PAPER JAM 0
Recording paper has jammed in
the paper feeding area.
Press Stop and clear the jam.
See page 7.1.
NO PAPER
The recording paper has run
out.
Load the recording paper.
OVER HEAT
The printer part in your unit
has overheated.
Please wait until it cools down.
If you cannot solve the problem,
please call for service.