Filter
Top Products
3.39
Stand-alone Fax
Sending Confirmation
Shows the fax number, the number of pages, elapsed time of the
operation, the communication mode, and the communication results.
You can print the this confirmation report in one of the following ways
according to your setting in System Setup(see page 3.3):
• Automatically after each transmission (ON)
• Automatically only if an error occurs during transmission (ERROR)
• No report printed at all (OFF). You can print this report manually.
Schedule Information
Shows the document currently stored for Delayed transmission, Priority
transmission, Broadcasting, Send polling and Toll Save fax. The list
shows the starting time, type of operation, etc.
System Data List
Shows the status of the user-selectable options. After you change any
setting, print this list to confirm your changes.
Multi-Communication Report
Is printed automatically after sending documents to or receiving
documents from more than one location.
Callback Message
Is printed out automatically when you do not respond to a remote
operator’s Voice Request.
Power Failure Report
Is printed out automatically when power is restored after a power failure.
This report shows data erased by the power failure.
TO PRINT LISTS
1. Press Report/Help on the front panel. The display shows the first
menu.
2. Press ➛ or ❿ until you find the list you want to print, then press
Start/Enter. The selected list will be printed.
HELP