Filter
Top Products
4.6
Printing
Notes:
• Make sure that you select the Manual for Paper Source and the
correct paper size and type from your software application before
starting your print job. See page 4.14.
• When you use the manual paper tray, the paper must loaded in
the automatic paper tray. By doing so, you can prevent the paper
jam which might occur in the manual tray.
1. Place the print media in the manual input tray with print side facing
up and adjust the paper guides to the width of the print media.
• Load a sheet of the envelope with the flap side facing away from
you. Make sure that the stamp area is at the top left and the end of
the envelope with stamp area enters the tray.
• Load transparencies face up with the adhesive strip on top
going into the tray first.