Filter
Top Products
3.31
Stand-alone Fax
Priority Fax
When the priority fax is enabled, a high priority document can be
transmitted ahead of reserved operations. The document is scanned into
the memory, then transmitted when the current operation is concluded.
In addition, a priority transmission will interrupt a broadcast operation
between stations (i.e., when transmission to station A ends, before
transmission to station B begins) or between redial attempts.
1. Load the document face down. If necessary, adjust Resolution, or
Contrast. For details, see page 3.8.
2. Press Advanced FAX on the control panel. The display shows the first
menu; BROADCASTING.
3. Press ➛ or ❿ until ‘PRIORITY FAX’ appears, then press Start/Enter
to access the Priority Fax menu.
4. Enter the number of the remote machine using the ten number
keypad.
You can also press a one-touch button. If not, press Speed(#), enter
a 2-digit speed dial number, then press Start/Enter. The stored
number appears on the display.
5. Press Start/Enter to confirm the number. The display asks you to
enter a name.
6. If you want to assign a name to the transmission, enter the name.
If not, skip over this step.
For details on how to enter a name using the number keypad,
see page 3.19.
7. Press Start/Enter. The document will be scanned into memory. The
display shows the memory capacity and the number of pages being
stored.
8. The machine shows the number being dialled, then begins sending the
document.