Filter
Top Products
5.7 <
Loading originals and print media>
3 After loading paper, set the paper type and size for the manual tray.
See the next section for copying and faxing or the Software
Section for PC-printing.
Note
The settings made from the printer driver override the
settings on the control panel.
Tips on using the manual tray
• Load only one sheet of print media at a time in the manual tray.
• To prevent paper jams, do not add paper when there is still paper in
the manual tray. This also applies to other types of print media.
• Print media should be loaded face up with the top edge going into the
manual tray first and be placed in the center of the tray.
• Always load only the print media specified in page 5.2 to avoid paper
jams and print quality problems.
• Flatten any curl on postcard, envelope, and label before loading it into
the manual tray.
Setting the paper size and type
After loading paper in the paper tray, you need to set the paper size and
type using the control panel buttons. These settings will apply to Copy
and Fax modes. For PC-printing, you need to select the paper size and
type in the application program you use on your PC.
1 Press Menu. Paper Setting appears on the top line of the display.
2 Press the Scroll buttons until Paper Size appears and press Enter.
3 Press the Scroll buttons until the paper tray you want appears and
press Enter.
4 Press the Scroll buttons until the paper size you are using appears
and press Enter.
5 Press upper level to return to the upper level.
6 Press the Scroll buttons until Paper Type appears and press Enter.
7 Press the Scroll buttons until the paper type you are using appears
and press Enter.
8 Press Stop/Clear to return to Standby mode.
Verifying an output location
The machine has a paper output location which holds 100 sheets of paper.
The output tray collects printed paper face down, in the order in which
the sheets were printed.
Note
Pull the output support not to drop the printed paper.
1
1
output tray