Filter
Top Products
12.6 <
Maintenance>
Printing continuously when the Toner Empty
Replace Toner message appears
When the toner cartridge is nearly empty, the machine shows the Toner
Empty Replace Toner message and stops printing. You can set the
machine to disregard this message when it appears and to continue
printing, even though print quality is not optimal.
1 Press Menu until Machine Setup appears on the top line of the
display.
2 Press the Scroll buttons until Ignore Toner appears and press
Enter.
3 Press the Scroll buttons until On appears and press Enter.
If you select Off, the received fax cannot be printed until you install
a new toner cartridge. However, faxes can be received into memory
as long as it allows.
4 Press Stop/Clear to return to Standby mode.
Clearing the Toner Empty Replace Toner
message
When the Toner Empty Replace Toner message appears you can
configure not to see this message again not to disturb you.
1 Press Menu until Maintenance appears on the top line of the
display.
2 Press the Scroll buttons until CLR Empty Msg. appears and press
Enter.
3 Press the Scroll buttons until On appears and press Enter.
4 Now the Toner Empty Replace Toner message does not appear
but the Replace Toner message will remain for reminding you that
the new cartridge needs to be installed for quality.
Caution
Once you have selected On, this setting will be permanently
written to the memory of the toner cartridge, and this menu will
be disappeared from the Maintenance menu.
Maintenance parts
To avoid print quality and paper feed problems resulting from worn parts
and to maintain your printer in top working condition, the following items
will need to be replaced at the specified number of pages or when the life
span of each item has expired.
Samsung highly recommends that an authorized service provider, dealer
or the retailer where you bought printer performs this maintenance
activity.
Replacing the ADF rubber pad
You will need to replace the ADF rubber pad when there seems to be a
consistent problem with paper pickup or when its specified yield is
reached.
1 Open the ADF cover.
2 Remove the ADF rubber pad from the ADF, as shown.
3 Insert a new ADF rubber pad into place.
4 Close the ADF cover.
Items Yield (Average)
ADF rubber pad Approx. 20,000 pages
Transfer roller Approx. 50,000 pages
Fuser unit Approx. 50,000 pages
Pickup roller Approx. 50,000 pages
1
ADF rubber pad
1