Filter
Top Products
Section 3: Configuration and Operation
GT Series Operator’s Manual Page 3-22
The printer can be set to go into ONLINE mode automatically upon
being turned on. Otherwise, the printer starts in the OFFLINE state.
Press the / buttons to select YES or NO. The default setting is
YES.
Press the ENTER button to confirm the setting and proceed to the
next screen.
The printer can be set to feed one label upon being turned on.
Press the / buttons to select YES or NO. The default setting is
NO.
Press the ENTER button to confirm the setting and proceed to the
next screen.
The printer can be set to feed one label upon going into ONLINE
state after an error has been corrected.
Press the / buttons to select YES or NO. The default setting is
NO.
Press the ENTER button to confirm the setting and proceed to the
next screen.