Filter
Top Products
Section 4: Cleaning and Maintenance
GT Series Operator’s Manual Page 4-5
4.5 ADJUSTING PRINT QUALITY (CONT’D)
Besides varying the rate at which labels are printed, this adjustment can be used to regulate any
changes in print quality.
LCD Panel — Print Speed can be set using the front panel LCD
panel or by sending the Print Speed software command from a
computer. On the GT408 and GT412, there are 11 settings, from
02 ip/s (slowest) to 12 ip/s (faster). The default setting is 6. On the
GT424, there are five settings, from 02 ip/s to 06 ip/s, and the default
setting is 3 ip/s.
For instructions on setting Print Speed, refer to page 3-7, Operation and Configuration.