Filter
Top Products
Section 3: Configuration and Operation
GT Series Operator’s Manual Page 3-23
The ESC sequence in SBPL commands can be defined as
standard (using non-printable code 1BH) or non-standard (some
other user code).
Press the / buttons to select the STANDARD or NON-
STANDARD option. The default setting is STANDARD.
Press the ENTER button to confirm the setting and proceed to the
next screen.
The printer can be set to go into SEMBL Mode automatically (to
execute a preloaded BASIC program) upon being turned on.
Press the / buttons to select YES or NO. The default setting is
NO.
Press the ENTER button to confirm the setting and proceed to the
last menu screen of the ADVANCED MODE settings.
If the printer has been set to go into SEMBL Mode automatically
upon being turned on, this setting will be available to let you specify
the program to be automatically executed.
Press the buttons to select from a list of valid programs
preloaded into memory. Or select the default NONE option, in
which case no program will be automatically executed.
Press the ENTER button to return to the first ADVANCED MODE
screen.