Filter
Top Products
Confidential Transmission
9
1
D Depending on the Confidential
Transmission type, use one of the
following procedures:
Default ID
A Check that [Default ID] has been
selected, and then press [OK].
"Default ID" is shown above the
highlighted [Confidential TX].
Note
r To cancel Confidential
Transmission, press [Cancel].
The display returns to that of
step
C
.
Override ID
A Select [ID Override].
B Enter the Confidential ID (4-
digit number) using the num-
ber keys, and then press [OK].
"ID Override" and the entered
Confidential ID are shown
above the highlighted [Confiden-
tial TX].
Note
r If you make a mistake, press
[Clear] or the {Clear/Stop} key
before pressing [OK], and
then try again.
r To cancel Confidential
Transmission, press [Cancel].
The display returns to that of
step
C
.
E Press [OK].
The standby display appears.
Note
r To check the settings, press
[Transmission Mode].
F Dial, and then press the {Start}
key.
Note
r You can cancel the transmission
setup for Confidential Trans-
mission. See p.19 “Canceling a
Transmission”.