Filter
Top Products
Other Transmission Features
76
4
Programming the Label Insertion
A Press [Programed Name] for La-
bel Insertion.
Note
r Press [OFF] if you do not
want to insert a destination.
Programming the Stamp Sender
Name
A Press [Change] for Stamp Send-
er Name.
B Press the name of the user to be
stamped, and then press [OK].
Note
r The set user name is dis-
played when the user code
has been stored. See General
Settings Guide.
r You can switch titles by
pressing the title keys.
r To stamp a non-pro-
grammed user name, press
[Non-programmed Name], and
then enter the user name.
r If you do not want to stamp
the sender's stamp, press [*Do
not Stamp].
Programming the Reduced
Image Transmission
A Press [ON] in for Reduced Im-
age TX.
Note
r Press [OFF] if you do not
want to do a reduced trans-
mission.
Programming the Auto Reduce
A Press [ON] for Auto Reduce.
Note
r Press [OFF] if you do not
want to use the Auto Reduce
function.
Programming the Default ID
Transmission
A Press [ON] for Default ID TX.
Note
r Press [OFF] if you do not
want to use ID transmission.
E Press [OK] twice.
F Specify the destination, and then
press the {Start} key.