Filter
Top Products
Sub Transmission Mode
63
4
p.79 “Transmission with Image
Rotation”
r This function is only available with
Memory Transmission.
r This function is only available with
the ADF.
r You can confirm whether both
sides were properly scanned using
the Stamp function. See p.72
“Stamp”.
r You can program one of the Quick
Operation keys with operations for
this function. Using the key allows
you to omit steps B and C.
A Place the original in the ADF, and
then select the scan settings you
require.
Reference
p.15 “Placing Originals”, Fac-
simile Reference <Basic Features>
p.33 “Scan Settings”, Facsimile
Reference <Basic Features>
B Press [Sub TX Mode].
C Press [2 Sided Original].
D Specify the original position.
Check the orientation of the placed
document, and then press or
.
Note
r Make sure that the specified
original position matches the
orientation of originals loaded
in the ADF.
E Specify the page opening orienta-
tion from [Top to Top] or [Top to Bot-
tom].
F Specify the transmission mode
from [2 Sided from 1st Page] or [1 Sid-
ed for 1st Page], and then press
[OK].
Original
Original position
Page opening orinentation
Output at the other end
Top to Bottom
Top to Bottom
Top to Top
Top to Top
A4, 8
1
/2" x 11"
GHPY030E