Filter
Top Products
Advanced Features
51
4
C Press [SEP Code].
D Press [RX SEP Code].
E Enter a SEP Code, and then press
[OK].
“SEP Code” appears one line
above [Adv. Features] on the dis-
play.
Note
r If you make a mistake, press
[Cancel] or the {Clear/Stop} key
before pressing [OK], and then
try again.
F To enter a password, press [Pass-
word (PWD)].
G Enter the password using the
number keys, and then press [OK].
H Press [Exit].
I Press [Transmission Mode].
J Press [Polling RX].
K Press [Default ID/Free Polling RX],
and then press [OK].
[Polling RX] is highlighted, and
“Deflt ID/Free Poll.” is shown.
Note
r To cancel Polling RX, press [Can-
cel]. The display returns to that
of step
J
.
L Press [OK].
The standby display appears.
M Press the {Start} key.
PWD Code
There are times you may want to use
a password when receiving faxes by
polling using the SEP Code function.
Note
r The password can be up to 20 dig-
its long.
r You can enter numbers, *, #, and
spaces as a password.
r You can store IDs in destination
lists and Programs. See "Register-
ing a Fax Destination", General Set-
tings Guide. See p.125 “Registering
and Changing Keystroke Pro-
grams”.
r Messages you send using this
function are marked “PWD” on all
reports.