Filter
Top Products
Other Transmission Features
56
4
On Hook Dial
The On Hook Dial function allows
you to dial while hearing tone from
the internal speaker. You can send a
fax checking the connection.
Limitation
r This function is unavailable for the
optional extra G3 interface unit.
Note
r This function is unavailable in
some countries.
r If Transmission Result Report (Im-
mediate Transmission) is printed,
the result of a transmission with
On Hook Dial is not mentioned in
the report.
A Place the original, and then select
the scan settings you require.
Reference
p.15 “Placing Originals”, Fac-
simile Reference <Basic Features>
p.33 “Scan Settings”, Facsimile
Reference <Basic Features>
B Press the {On Hook Dial} key.
You will hear a low tone from the
internal speaker.
Note
r If you want to cancel this oper-
ation, press the {On Hook Dial}
key again.
C Dial.
The machine immediately dials the
destination.
Note
r You can adjust the volume of
the On-hook sound by pressing
[Higher] or [Lower] in the upper
right-hand corner of the dis-
play. The volume can also be
preprogrammed in “General
Settings and Adjustments”. See
p.75 “Adjusting the Volume”,
Facsimile Reference <Basic Fea-
tures> and p.142 “General Set-
tings/Adjustment”.
r If you make a mistake, press the
{On Hook Dial} or {Clear Modes}
key, and then return to step
B
.
D When the line is connected and
you hear a high-pitched tone,
press the {Start} key.
The transmission starts.
Note
r After transmission, the machine
returns to standby mode.
r If you want to cancel a transmis-
sion, press the {Clear/Stop} key,
and then remove the originals.