Filter
Top Products
Advanced Features
55
4
With transfer requests set in the system
settings
You can program a Quick Dial key
with Transfer Station and/or Receiv-
ing Station using the Transfer Re-
quest function in the System Settings.
See General Settings Guide.
A Place the original down, and then
select the desired settings.
Reference
p.15 “Placing Originals”, Fac-
simile Reference <Basic Features>
p.33 “Scan Settings”, Facsimile
Reference <Basic Features>
B Press the key programmed with
Transfer Request.
C Press the {Start} key.
-Setting Multistep Transfer
Program a Transfer Station in a desti-
nation list. When receiving a Transfer
Request that specifies the same Re-
ceiving Station as programmed in the
destination list, this machine sends a
Transfer Request to the programmed
Transfer Station. This function allows
fax messages to be transferred via
multiple stations and makes fax mes-
sage transfer more efficient.
You can program up to 30 Receiving
Stations per Transfer Station. For
more information, contact your ser-
vice representative.