Filter
Top Products
Other Transmission Features
50
4
J Press the {Start} key.
Note
r If you use Immediate Transmis-
sion and the fax machine at the
destination does not support
the SUB Code function, a mes-
sage will appear on the display
to inform you of this. When this
happens, press [OK] to cancel
the transmission.
SID Code
There are times when you may want
to use an “SID” (Sender ID) when
sending confidential faxes with the
SUB Code function.
Note
r The ID can be up to 20 digits long.
r You can enter numbers, *, #, and
spaces to program an ID.
r You can store IDs in destination
lists and Programs. See p.125
“Registering and Changing Key-
stroke Programs”. See “Register-
ing a Fax Destination”, General
Settings Guide.
r Messages you send using this
function are marked “SID” on all
reports.
SEP Code
Normally you can only use Polling
Reception to receive faxes from ma-
chines that have the Polling Recep-
tion function and the same
manufacturer. However, if a machine
of another manufacturer supports
Polling Reception, you can receive fax
messages from the other party using
this method instead.
You can receive messages that have
the same SEP Code as the SEP Code
you entered.
Note
r The ID can be up to 20 digits long.
r Make sure the number of digits in
the ID matches the one set on the
machine to which you are sending.
r You can enter numbers, *, #, and
spaces to program an ID.
r You can store IDs in destination
lists and Programs. See "Register-
ing a Fax Destination", General Set-
tings Guide. See p.125 “Registering
and Changing Keystroke Pro-
grams”.
r Messages you receive using this
function are marked “SEP” on all
reports.
r This function is not available with
Internet Fax transmissions.
A Dial the fax number using the
number keys.
B Press [Adv. Features].