Filter
Top Products
Loading paper and documents
2 - 6
2
Labels and transparencies
The machine will print on most types of labels
and transparencies designed for use with a
laser machine. Labels should have an
adhesive that is acrylic-based since such
material is more stable at the high
temperatures in the fusing unit. Adhesives
should not come in contact with any part of
the machine, because the label stock may
stick to the OPC belt or rollers and cause
jams and print quality problems. No adhesive
should be exposed between the labels.
Labels should be arranged so that they cover
the entire length and width of the sheet. Using
labels with spaces may result in labels
peeling off and causing serious jams or print
problems.
All labels and transparencies used in this
machine must be able to withstand a
temperature of 392 degrees Fahrenheit (200
degrees centigrade) for a period of 0.1
seconds.
Label and transparency sheets should not
exceed the paper weight specifications
described in this User's Guide. Labels and
transparencies exceeding this specification
may not feed or print properly and may cause
damage to your machine.
Transparencies and labels can be fed from
Tray 1 only.
Types of labels and transparencies to
avoid
Do not use labels or transparencies that are
damaged, curled, wrinkled or an unusual
shape.
IMPORTANT
■ Avoid feeding labels with the carrier
sheet exposed because your machine
will be damaged.
■ When feeding transparencies, use the
recommended type for laser machines.
For detailed information on the
specification of the proper
transparencies to purchase, call your
dealer or Customer Service.