Filter
Top Products
Chapter 3
3 - 8
Sleep Time
Setting the Sleep Time reduces power
consumption by turning off the fuser inside
the machine while it is idle. You can choose
how long the machine is idle (from 00 to 99
minutes) before it goes into sleep mode. The
timer is automatically reset when the machine
receives a Fax or PC data or makes a copy.
The factory setting is 30 minutes. While the
machine is in sleep mode you will see
Sleep
on the LCD. If you try to print or copy in sleep
mode, there will be a short delay while the
fuser warms up to its working temperature.
1
Press Menu/Set, 1, 6, 2.
2
Use the dial pad to enter the length of
time the machine is idle before it goes
into sleep mode (00 to 99).
Press Menu/Set.
3
Press Stop/Exit.
Note
■ If you want to turn off sleep mode, press
Start
(either Black or Color) and Options
simultaneously in Step 2.
■ If the machine is in Sleep Mode when you
change the Sleep Time, the new setting
will take effect the next time the machine
copies, prints or is turned off and on.
Mode Timer
The machine has three temporary mode keys
on the control panel: Fax, Scan and Copy.
You can change the number of seconds or
minutes the machine takes after the last Scan
or Copy operation before it returns to Fax
mode. If you select
Off, the machine stays in
the mode you used last.
1
Press Menu/Set, 1, 1.
2
Press ▲ or ▼ to select 0 Sec,
30 Secs, 1 Min, 2 Mins, 5 Mins or
Off.
Press Menu/Set.
3
Press Stop/Exit.
Ecology
2.Sleep Time
General Setup
1.Mode Timer