Filter
Top Products
11 - 1
11
‘
How to copy
You can use your machine as a copier,
making up to 99 copies at a time.
Entering Copy mode
Before making copies, make sure that
(Copy) is illuminated in blue. If it is not,
press (Copy) to enter Copy mode. The
default setting is Fax mode. You can change
the number of seconds or minutes that the
machine stays in Copy mode. (See Mode
Timer on page 3-8.)
Printable Area
The printable area of your machine begins at
approximately 0.12 in. (3 mm) from both
sides and 0.16 in. (4 mm) from the top or
bottom of the paper.
Making a single copy
1
Press (Copy) to illuminate it in
blue.
2
Load your document.
(See Loading documents on
page 2-10.)
3
Press Black Start or Color Start.
Note
To stop copying, press Stop/Exit.
Making copies
Copy Ratio
The LCD shows the default copy setting
Contrast
Quality
Stack/Sort No. of Copies
Stack Copies:01
100% Auto
0.12" (3 mm)
0.16" (4 mm)
Unprintable
area