Filter
Top Products
Scorpion 240 Autoloader Installation Manual A-31
LCD Message Description
CASSETTE INSTALL
PROBLEM
A cartridge has been inserted into the magazine incorrectly.
Eject the magazine from the autoloader (see page A-22);
then remove the cartridge from the magazine and reinsert it
correctly.
CHECK DOOR The autoloader door is open.
CLEANING The autoloader is loading a cleaning cartridge into the drive.
CLEANING REQUIRED The tape drive requires cleaning.
DOOR LOCKED The autoloader door is locked.
DOOR UNLOCKED The autoloader door is unlocked.
DRIVE ERROR
04/XX/XX
There is a problem with the tape drive. For additional
information, contact Seagate technical support.
ERASE TAPE X The tape drive is erasing the tape cartridge from slot X.
EJECTING MAGAZINE The autoloader is ejecting the tape magazine.
EJECT?
PRESS ENTER
A tape resides in the drive and the Eject button has been
pressed. Eject confirmation is required before the tape can
be ejected.
EJECT PREVENT The autoloader is preventing you from ejecting the
magazine because the software has enabled PMR (Prevent
Media Removal).
FAN FAILURE There is a problem with the autoloader fan. Contact
Seagate technical support.
INSERT EMPTY
MAGAZINE
The autoloader cannot unload a tape from the tape drive to
the magazine because the magazine in the autoloader is
fully loaded. Eject the magazine; then insert an empty
magazine into the autoloader. For more information on
ejecting a magazine, see “Ejecting the magazine” on page
A-22.
LOADER ERROR
04/XX/XX
There is a problem with the autoloader hardware. For
additional information, contact Seagate technical support.
LOAD TAPE X The tape drive is loading the tape cartridge from slot X.
MEDIA ERROR
03/XX/XX
There is a problem with the tape cartridge. For additional
information, contact Seagate technical support.
NO MAGAZINE There is no magazine in the autoloader.
READ TAPE X The tape drive is reading from a tape