Filter
Top Products
A-46 Scorpion 240 Autoloader Installation Manual
3. Use the
config
command to rebuild the kernel and include
the new device definition. Refer to the
config
man page
for details.
Solaris 2.x
1. To configure Solaris 2.x for compatibility with the Scorpion
240, add the following lines to the file
st.conf
in the
directory
/kernel/drv
.
tape-config-list=
"SEAGATE DAT 06240-XXX","Seagate DAT Drive","SEAGATE_DAT";
SEAGATE_DAT = 1,0x34,0,0xd639,4,0x00,0x8C,0x8C,0x8C,3;
Note: The inquiry string above contains four spaces between
the word
DAT
and the value
06240
.
2. After modifying the file
st.conf
, you must reconfigure the
kernel by booting the system using the
boot -r
command