Filter
Top Products
25
PROCESS CONTROL SHEET
Process: __________________________________
Application Use: ____________________________
Top Unwind: ______________________________
Bottom Unwind:____________________________
CONTROL PANEL SETTINGS
Main Roller Pressure:_________________________
Motor Speed Setting: ________________________
WEBBING SETTINGS
Web Tension Top Unwind:
Light ________/ Med. _________/ Heavy _________
Web Tension Bottom Unwind:
Light ________/ Med. _________/ Heavy _________
Shim Wheel Settings: ________
WEBBING PROCEDURE
________________________________________
________________________________________
________________________________________
________________________________________
________________________________________
NOTE: We recommend that you make a
photocopy of this page. With each successfully run
application, record the process and settings and a
diagram of the webbing procedure. Keep the record
so the application can be repeated at a later date.
HINT: If a standard image is made available for
each new process then sales materials and samples
can be developed for reference.
Unwind
Shaft
TOP
ROLLER
BOTTOM
ROLLER
Wind-Up
Idler
Unwind
Shaft
Figure 18. Image
®
600-C Blank Webbing Diagram