Filter
Top Products
5
ENVIRONMENT CONDITIONS
The following environmental conditions are ideal for
the best operation of the laminator.
AMBIENT TEMPERATURE
The best temperature for the laminator is between 50°F
and 86°F (16°C and 30°C).
Do not expose the laminator to direct sunlight as output
quality may be affected.
RELATIVE HUMIDITY
For best results, the ambient relative humidity for the
laminator should be between 70-90% non-condensing.
Too much humidity will affect the prints being
laminated causing problems with film adhesion.
WATER AND MOISTURE
If the laminator is installed in a damp room or near
water, the electrical power supply must be in accordance
with the standards prevailing in the country concerned.
SURROUNDINGS
Install the laminator in surroundings that are as clean
and dust free as possible in order to obtain the highest
quality output.
The background dust level must not exceed that found
in a typical office/computer room environment.
The materials that are used on this laminator can have
an electrostatic charge and will attract dust, adversely
affecting the output.