Filter
Top Products
30
TECHNICAL SPECIFICATIONS
MECHANICAL
Dimensions (H x W x D) 78”w x 32”d x 50”h (198 cm x 81 cm x 127 cm)
Net Weight 630 lbs. (286 kg)
Shipping Weight (in crate) 1080 lbs. (490 kg)
Roller Construction Two high release silicone-covered rollers
Mechanical Requirements 2 CFM compressed air @ 100 psi, 0.25” (0.6 cm) ID
flexible line
PROCESS
Max. Working Width 61” (155 cm) maximum
Max. Roller Speed 10 fpm (3.1 mpm)
Core Inner Diameter 3” (7.6 cm)
Maximum Material Outside Diameter 8” (20.3 cm)
Maximum Roller Opening 1-1/8” (2.9 cm)
Maximum Board Thickness 1” (2.54 cm)
Nip Settings
0, 1/16, 1/8, 3/16, 1/4, 3/8, 1/2, 3/4, 1 and –1/16”
(0, 2, 3, 5, 6, 10, 13, 19, 25 and -2 mm)
ELECTRICAL REQUIREMENTS
Single phase version - Domestic 120-240 VAC 50/60 Hz, 2W + G, 2 Amp
Single phase version - International 208-240 VAC 50/60 Hz, single phase, 2 Amp
Maximum Power consumption 240 watts
ORDER CODES
SEAL
®
Image
®
600-C Single phase - Domestic IT-600-CD
SEAL
®
Image
®
600-C Single phase - International IT-600-CI1
Each SEAL
®
Image
laminator has a Serial Number Label located on the right side cabinet when facing the rear. This
label indicates the model type, the electrical requirements, and the laminator serial number (important for reference if
any servicing is required).