Filter
Top Products
3-20
<Parameter (Enter a choice)>
- NONE:
The conditioning pass is not performed.
Select this parameter when performing the continuous printing
with the media that is hard to be wrinkled.
When the printer is left in the waiting condition for a long time,
the print off due to wrinkles may be caused.
- 30 min:
The conditioning pass is performed at every 30 minutes.
When the printer starts printing before 30 minutes interval, the
condition pass is always performed at start of the printing.
Select this parameter when the printer prints in a high humidity
environment frequently and the paper is extremely wrinkled.
- 1 hour:
The conditioning pass is performed at every 1 hour.
Select this parameter when the print interval is more than 1
hour and the paper is extremely wrinkled.
- 2 hours:
The conditioning pass is performed at every 2 hours.
Select this parameter when the print interval is more than 2
hours and the paper is extremely wrinkled.
- 4 hours:
The conditioning pass is performed at every 4 hours.
Select this parameter when the print interval is more than 4
hours and the paper is extremely wrinkled.