Filter
Top Products
3-32
F.ADJ Menu
This menu is used to set paper feed adjustment parameters.
When the
key is pressed, parameters can be set.
(1) Paper feed adjustment pattern
Prints a pattern for adjusting a paper feed amount.
Press the
key during print to stop the print.
<Parameter (Enter a choice)>
- ROUGH (NORMAL):
Prints the paper feed amount adjustment pattern at every 0.2 %
step between 99.0 to 101.0 %.
(Prints with standard and 4-pass mode)
- ROUGH (H-QUAL):
Prints the paper feed amount adjustment pattern at every 0.2 %
step between 99.0 to 101.0 %.
(Prints with high quality and 8-pass mode)
- ROUGH (H-DENS):
Prints the paper feed amount adjustment pattern at every 0.2 %
step between 99.0 to 101.0 %.
(Prints with high density and 8-pass mode)
INK ENTRY
PAPER F.ADJ
#FEED PATTERN
>01 : ROUGH 1
# FEED PATTERN
>ROUGH (NORMAL)