Filter
Top Products
3-33
Section 3 Operation Panel Menu Operations
- ROUGH (DRAFT):
Prints the paper feed amount adjustment pattern at every 0.2 %
step between 99.0 to 101.0 %.
(Prints with draft and 2-pass mode)
- DETAIL (NORMAL):
Prints the paper feed amount adjustment pattern at 0.04 % step
between the current setting value ±0.08 %.
(Prints with standard and 4-pass mode)
- DETAIL (H-QUAL):
Prints the paper feed amount adjustment pattern at 0.04 % step
between the current setting value ±0.08 %.
(Prints with high quality and 8-pass mode)
- DETAIL (H-DENS):
Prints the paper feed amount adjustment pattern at 0.04 % step
between the current setting value ±0.08 %.
(Prints with high density and 8-pass mode)
- DETAIL (DRAFT):
Prints the paper feed amount adjustment pattern at 0.04 % step
between the current setting value ±0.08 %.
(Prints with draft and 2-pass mode)
(2) Paper feed adjustment correction value setting (FEED ADJUST)
Sets the paper feed adjustment correction value.
Enter a correction value according to the paper feed adjustment
pattern print.
The BASE value is displayed alternately on the 1st line.
<Parameter (Enter a value)>
xxx.xx% (97.00 to 103.00)
FEED ADJUST
>01 : 099.80%
BASE=099.88%
>01 : 099.80%
Menu Operations