Filter
Top Products
2-46
Using the FAN Guard Positioning Bar
Cut suction of the FAN for unused area to protect the head from
suction of the FAN.
Slide the FAN guard positioning bar between 50 inch width and 64
inch width.
Set the FAN guard positioning bar according to the media width
you use.
- When setting the FAN guard positioning bar for 50 inch
width media at 64 inch width media printing, the media
cannot be passed.
- Do not move the fan guard positioning bar during print.
If the fan guard positioning bar hits the media, paper jam
could be occurred.
NOTE
Paper
Slide bar