Filter
Top Products
2-44
4
Tighten the head fixing screws (2 pieces).
- When changing the height of the head, tighten the head
fixing screws while pushing the head down softly with your
hand.
- When the head height is changed, change head height
setting (19) in ENTER menu.
- When the head height is changed, print gap may be
occurred at reciprocating print. In that case, adjust the
correction value for reciprocating print. (See (20)
Reciprocating print position (Left) adjustment value, and
(21) Reciprocating print position (Right) adjustment value
in ENTRY nemu.)
NOTE