Filter
Top Products
1-7
Section 1 Getting Started (Basic knowledge)
Consumables
Precautions for handling prints.
- Do not touch the print surface before drying up the ink.
Hold margins of the media for handling.
Especially use care before 24 hours after printing.
- Rubbing print surface causes color fading or color transfer.
Do not pile print surface to prevent color transfer.
- Do not pile together with copy prints or laser prints to prevent
sticking due to ink or toner.
- Do not rub, scratch, or hold the media to prevent pealing.
- Do not rub or leave the paper in wet condition to prevent blurring.
Other precautions
- Media causes color fading and a change in quality in getting
old.
Check paper condition and use well-conditioned paper.
- Paper dust due to cutting may cause float of coating.
- When using vinyl (with glue), adhesive matter (with glue) may
be sticked to the platen.
In this case, wipe up the adhesive matter referring to "Section 2,
Inspection & Maintenance".
Sticking of adhesive matter may cause paper jamming.