Filter
Top Products
2-49
Section 2 Basic Operations
#CAP CLEANING
>
NOTE
Clean he edge and periphery
of the upper surface of the
cap.
Daily inspection and maintenance
Perform the followings every day before print.
<Capping Unit Cleaning>
Enter to the SERVICE menu and select “CAP CLEANING” on the
operation panel.
The head carriage will move to the center of the printer (platen) and
you can access easily to the capping unit.
Open the rear cover and cap cover. Wipe up the edge and periphery of
the upper surface of all (six) caps carefully with the cotton swab.
Close the cap cover and rear cover. The head carriage will return to
the capping unit position (home position) automatically.
- Do not leave the printer for long time in the condition that
the head carriage is not on the capping unit.
NOTE
Inspection & Maintenance
Use Capping fluid and gloves
Note: When the swab moves smoothly over the surface the cabs are clean
1
the