Filter
Top Products
2-41
Section 2 Basic Operations
Heater preset temperature by medium
The heater preset temperature for medium is listed in the table.
Preset the heater temperature according to the media you use.
NOTE
- When the rear heater temperature is set to high, fixibility of
the ink is improved, but media wrinkle or mat print may be
caused.
Adjust heater temperature according to the media type and
environmental temperature.
- Set the front/rear heater temperature higher 5 °C than the
print heater’s.
Bad temperature balance between the front/rear heater
and print heater may cause media wrinkle.
muideMepyTaideM
teserpdednemmoceR
erutarepmet
edomtnirP
TNORFTNIRPRAER
elynivyssolG
edilorhc
yssolGC°54C°04C°54
htap4
noitcerid-ib
edilorhcelynivtaMettaMC°54C°04C°54
htap4
noitcerid-ib
rennaBrennaBC°54C°04C°54
htap4
noitcerid-ib
Changing Heater Control Setting Temperature