Sharp AL2041 All in One Printer User Manual


 
2
12
BYPASS FEED (including special paper)
The multi-bypass tray can be used to feed standard paper, transparency film, labels,
envelopes, and other special purpose paper. Paper measuring from A6 to A4 and in
the weight range of 56 g/m
2
to 128 g/m
2
can be used in this tray. (For paper weighing
from 105 g/m
2
to 128 g/m
2
, A4 is the maximum size.)
The multi-bypass tray
1
Open the multi-bypass tray and extend the tray.
The multi-bypass tray can hold maximum of 50 sheets of paper.
(Capacity will vary depending on the type of paper loaded.)
The original image must be smaller than the paper or media for
copying. If the original image is bigger than the paper or media, this
may cause smudges on the edges of the copies.
To close the multi-bypass tray, perform step and then step
in the illustration and push the round projections at the right
of the tray until they click.
1
2
1
2